4
FN6690.1
September 26, 2008
fSCL
SCL Frequency
400
kHz
tIN
Pulse width Suppression Time at SDA and
SCL Inputs
Any pulse narrower than the max
spec is suppressed.
50
ns
tAA
SCL Falling Edge to SDA Output Data Valid
SCL falling edge crossing 30% of
VDD, until SDA exits the 30% to
70% of VDD window.
900
ns
tBUF
Time the Bus Must be Free Before the Start
of a New Transmission
SDA crossing 70% of VDD during
a STOP condition, to SDA
crossing 70% of VDD during the
following START condition.
1300
ns
tLOW
Clock LOW Time
Measured at the 30% of VDD
crossing.
1300
ns
tHIGH
Clock HIGH Time
Measured at the 70% of VDD
crossing.
600
ns
tSU:STA
START Condition Setup Time
SCL rising edge to SDA falling
edge. Both crossing 70% of VDD.
600
ns
tHD:STA
START Condition Hold Time
From SDA falling edge crossing
30% of VDD to SCL falling edge
crossing 70% of VDD.
600
ns
tSU:DAT
Input Data Setup Time
From SDA exiting the 30% to 70%
of VDD window, to SCL rising edge
crossing 30% of VDD.
100
ns
tHD:DAT
Input Data Hold Time
From SCL falling edge crossing
30% of VDD to SDA entering the
30% to 70% of VDD window.
20
900
ns
tSU:STO
STOP Condition Setup Time
From SCL rising edge crossing
70% of VDD, to SDA rising edge
crossing 30% of VDD.
600
ns
tHD:STO
STOP Condition Hold Time
From SDA rising edge to SCL
falling edge. Both crossing 70% of
VDD.
600
ns
tDH
Output Data Hold Time
From SCL falling edge crossing
30% of VDD, until SDA enters the
30% to 70% of VDD window.
0ns
tR
SDA and SCL Rise Time
From 30% to 70% of VDD
20 +
0.1 x Cb
300
ns
tF
SDA and SCL Fall Time
From 70% to 30% of VDD
20 +
0.1 x Cb
300
ns
Cb
Capacitive Loading of SDA or SCL
Total on-chip and off-chip
10
400
pF
Rpu
SDA and SCL Bus Pull-Up Resistor Off-Chip Maximum is determined by tR
and tF.
For Cb = 400pF, max is about
2k
Ω to~2.5kΩ.
For Cb = 40pF, max is about 15k
Ω
to ~20k
Ω.
1k
Ω
NOTES:
2. FT/OUT inactive.
3. LPMODE = 0 (default).
4. In order to ensure proper timekeeping, the VDD SR- specification must be followed.
5. Typical values are for T = +25°C and 3.3V supply voltage.
6. Limits should be considered typical and are not production tested.
7. These are I2C specific parameters and are not tested, however, they are used to set conditions for testing devices to validate specification.
8. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by
characterization and are not production tested.
Serial Interface Specifications
Recommended Operating Conditions. Unless otherwise specified. (Continued)
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
(Note 8)
TYP
(Note 5)
MAX
(Note 8)
UNITS NOTES
ISL12008
相关PDF资料
ISL12020MIRZ-T7A IC RTC/CALENDAR TEMP SNSR 20DFN
ISL12022IBZ-T7A IC RTC/CALENDAR TEMP SNSR 8SOIC
ISL12022MAIBZ IC RTC/CALENDAR TEMP SNSR 20SOIC
ISL12022MIBZ-T7A IC RTC/CALENDAR TEMP SNSR 20SOIC
ISL12022MIBZR5421 IC RTC/CALENDAR TEMP SNSR 20SOIC
ISL12023IVZ IC RTC/CLDR TEMP SNSR 14-TSSOP
ISL12024IRTCZ IC RTC/CALENDER 64BIT 8-TDFN
ISL12024IVZ IC RTC/CALENDAR EEPROM 8-TSSOP
相关代理商/技术参数
ISL12008IB8Z-T 功能描述:实时时钟 LW PWR RTC W/RESEAL 8LD RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
ISL12020 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Low Power RTC with VDD Battery Backed SRAM and Embedded Temp Compensation 【5ppm with Auto Day Light Saving
ISL12020CBZ 制造商:Rochester Electronics LLC 功能描述: 制造商:Intersil Corporation 功能描述:
ISL12020IBZ 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Low Power RTC with VDD Battery Backed SRAM and Embedded Temp Compensation 【5ppm with Auto Day Light Saving
ISL12020M 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Low Power RTC with Battery Backed SRAM, Integrated ±5ppm Temperature Compensation and Auto Daylight Saving
ISL12020M_11 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:High-Accuracy RTC Modules, Feature-Rich RTCs
ISL12020MIRZ 功能描述:实时时钟 REAL TIME CLOCK AND TMP COMP CRYSTL INLD RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
ISL12020MIRZ-EVALZ 功能描述:电源管理IC开发工具 ISL12020MIRZ-EVALZ EVALBRD ROHS COMPL RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V